Stereo Tube Preamp
Stereo Tube Preamp
Connect Mic to Computer?
I have two computers a dell inspiron 9100 and a satellite toshiba. I have an at2020 microphone and a tube ultragain mic200 preamp. I also have a u-control uca202 audio interface. With all of the items I have mentioned how do I connect my microphone to my computer? I think I have the necessary cords. Here is what I have: female xlr to male xlr(to connect from mic to preamp),female xlr to 3.5mm stereo plug(connect from preamp to computer) but that doesnt work. Any help on a certain cord or other equipment I need that is necessary to connect my mic to my computer would be greatly appreciated. Here is pictures of my mic,preamp,audio interface, and computer. Thanks!
Just plug the thingy into the other thingy.
 |
Musical Fidelity V-CAN Headphone Amplifier
List Price:  |
DescriptionThe V-CAN is a genuine state-of-the-art headphone amplifier. Most high quality headphones have impedance of around 30 Ohms. Almost all headphone amps have an output impedance between 50 and 100 Ohms. Because of their high output impedance they cannot drive headphones properly... |
 |
DICE iTPA-220 iPod Tube Amplifier System
List Price: |
DescriptionThe iPod tube amplifier system fills your home or office with true audiophile, rich and warm quality sound. When placed into the iPod docking tray, it charges the iPod allowing endless hours of listening to your favorite music... |
 |
Pyle PP999 Phono Turntable Pre-Amp
List Price: |
DescriptionPyle phono pre amp -transforms phono level output to line level output for connection to receiver or amp -includes power adapter... |
 |
AudioSource AMP-100 Stereo Power Amplifier
List Price: |
DescriptionAudiosource 50 watt x 2a/b spkr sel a/b spkr sel -stereo powered source switcher/power amplifier -2 x 50 watt rms into 8-ohm impedance, 2 x 60 watts (4 ohms) -100 watts bridged mono -auto-on signal sensing -dual line-level inputs with priority override switching - perfect for custom home audio distribution -a/b switchable speaker outputs -independent front panel volume and balance controls -13 1/2 w x 2 3/4 h x 8 d... |
 |
Onkyo TX-8255 Stereo Receiver
List Price: |
Description50 watts x 2 (stereo) into 8 ohms (20-20,000 Hz) at 0.08% THD * 4-ohm capability allows use with a wide range of speakers * compatible with Onkyo's DS-A3 iPod dock * 6 audio inputs (including phono) * 40 AM/FM presets with station naming * |
 |
The Tube Amp Book - Deluxe Revised Edition Book and Disk Package (Hardcover)
List Price: |
DescriptionThe deluxe revised Tube Amp Book edition contains 40% new material, with a comprehensive A-Z section covering all the great tube amp manufacturers, with histories, photos, and information. Amplifier brands include Ampeg, Dr... |
 |
Valve Amplifiers, Third Edition
List Price: |
DescriptionMorgan Jones' Valve Amplifiers has been widely recognised as the most complete guide to valve amplifier design, modification, analysis, construction and maintenance written for over 30 years. As such it is unique in presenting the essentials of 'hollow-state' electronics and valve amp design for engineers and enthusiasts in the familiar context of current best practice in electronic design, using only currently available components... |
 |
Mullard Tube Circuits for Audio Amplifiers
|
Marantz 7 tube preamp & Marantz 9 mono 70w amps in my vintage time-machine stereo chain
Best Home Speakers You've Ever Owned?
What was it about them that made them your favorite? Do you still have them, and if not, what did you replace them with?
My favorite was a pair of Merlin TSM-M minimonitors in an exquisite "ruby heart" (i.e. candy apple red) high-gloss finish atop a pair of Osiris speaker stands filled with sand. Clarity and imaging were absolutely breathtaking! They were driven by a Clayton Audio S40 pure class A solid state stereo power amp, Conrad-Johnson PV-10 tube preamp, and a Sony CDP-XA7ES CD player. I also used a pair of KR Audio (then KR Enterprise) VT-9000 hybrid tubed monoblocks. I replaced the TSM's with a pair of Silverline Sonatina floor speakers in a bird's eye maple. Also great sounding speakers. Very smooth and silky from top to bottom.
My audio setup now has a pair of Paradigm Reference (Studio 100) speakers and I have been extremely happy with them - I've had them for a year and a half and they look like keepers. (I've been through at least 10 speakers in as many years!)l. They are fed by a Rotel CD player, a Counterpoint SA-5000 Vacuum Tube pre-amp and a Bryston Power Amp. I have yet to come across a better imaging and soundstage in a pair of speakers in my environment.
For my Home Theater, I have a pair of Klipsch La Scala for the front, Klipsch Heresy for the Center and Klipsch dipolars for surrounds. Sub duties are performed by a REL. The fronts are fed by a Rotel two channel power amp, the center and surrounds by a Rotel 5.1 power amp, behind which sits a Rotel 7.1 Pre-processor.
The La Scala and the Heresy are an incredible choice for Home Theater. They are highly efficient, fast and responsive. Vocals are phenomenal and the fronts handle big sound better than some movie theaters I have been to. At times, I do use the setup for listening to some jazz, but other than that, this is a dedicated home theater (with an 11' screen and projector)
Tags: alto stereo tube preamp, art dps ii stereo tube preamp, audio, diy, electronics, preamp, presonus bluetube stereo tube preamp, stereo tube preamp, stereo tube preamp kit, tube, tube preamp